In addition, increasing the kitchen fume and odor, and cleaning the fume purifier from time to time can not only ensure the good filtration effect and service life of the fume purifier.It is also very important to provide protection for bad situations and physical functions and health.If you accidentally find that it is too troublesome to clean the oil fume purifier thoroughly, you can also choose some small and easy-to-clean design styles, which can also save you a lot of worries.

Xingtai oil fume purification agent cleaning guide

Why thoroughly clean the fume purifier

As the most important equipment in the kitchen, the oil fume purifier is

Xingtai oil fume purification agent cleaning guide

Why thoroughly clean the fume purifier

<The oil fume purifier is the most important equipment in the kitchen and.It can also effectively filter out smoke, odor and other waste gas pollution to avoid harm caused to bad environments and physical functions.And after using it for a period of time, a large amount of oil stains and dust will accumulate on the surface of the oil fume purifier, which will not only affect the overall beauty, but also affect the purifier and the good use effect, and even more, it may cause failure.Therefore, cleaning the fume purifier from time to time is a specific step necessary to ensure very good and good use results, provide protection and health.

Preparation tasks before thoroughly cleaning the fume purifier

4 of the following preparations need to be completed: thoroughly clean the fume purifier.

• Power off and unplug the power plug
• Remove the oil net and filter on the fume purifier
• Prepare a basin of water, dishwashing liquid and brush

Cleaning steps of oil fume purifier

The specific steps for thoroughly cleaning the fume purifier are as follows:

1. Soak the oil mesh and filter mesh: Soak the oil mesh and filter mesh in a small amount of water for about 30 minutes to soak the dirt and oil stains on the surface.
2. Clean with a brush: Take out the soaked oil mesh and filter, and clean it with a brush and dish soap. When cleaning thoroughly, be careful not to break the grid.
3. Rinse again: Rinse the cleaned oil net and filter net with a small amount of water and then dry it with a clean towel.
4. Thoroughly clean the shell: thoroughly clean the shell of the fume purifier with a damp cloth or a very clean brush to remove dirt and oil stains from the surface.
5. Part Assembly: The cleaned oil mesh and filter can be installed home and plugged the power plug directly into the socket to fully restore power supply.

Thoroughly clean high frequency

Clean it thoroughly at least once a month. The detailed content is that the thorough cleaning of the oil fume purifier needs to be measured according to the high frequency and use status.Generally speaking.After all, if the use frequency is too high or the use situation is very special, it is necessary to reduce the thorough cleaning of the high frequency.After thorough cleaning, the filter needs to be replaced from time to time to ensure the good filtration effect of the fume purifier.

Conclusion

Lefa lll-front page First Entertainment-Home Page Lefa 2-Homepage Lefa Ill-front page Kuaiying lV500-front page