It must be carried out very strictly according to the instructions. The installation steps of the oil fume purifier are very necessary.Especially when connecting any component, it is necessary to ensure sealing of the relevant pipes or interfaces.If you don’t know about the oil fume purifier, or if there is a solution during the installation process, it is strongly recommended that you seek help from relevant professionals and people in a timely manner.

The oil fume purifier can be installed and displayed

Other Materials List

You can install the fume purifier before

The oil fume purifier can be installed and displayed

Other Materials List

1.Oil fume purifier body

2.Air pipe

3.Pipeline interface

4.Air switch

5.Wire cutters

6.Use of screw-making tools

Get ready for the mission

After completing the 4 other materials, some preparations need to be done:

1.Determine the installation location of the fume purifier

2.Cleaning can install the middle position, keeping the surface dry and thoroughly clean

3.Pay special attention to whether power supply and water sources meet the requirements

4.The intermediate position of the switch in the air should be not far from the fume purifier to avoid occurrence and inconvenient use.

Connecting air duct

And pay attention to the wrong wind direction and can be installed.The air duct should be kept in a sealed state as much as possible, and the air duct should be connected to the orifice on one side of the fume purifier.Pay special attention to choosing the appropriate air duct and connection method.The purification effect will be better.The length of the air duct should be accurately measured in advance and some residual gaps should be reserved when it can be installed to ensure space in motion.

Control the intersection

The interface must not have air leakage, and connect the two pipe interfaces.After connecting, you should pay attention to whether the connection direction is correct.During the installation process, it should be cut in strict accordance with the clearly specified dimensions to ensure that the size and shape of the joint interface fully complies with the requirements of the standard.At the same time, you can use an adjustable plate to ensure that the direction of the air outlet is incorrect when installing.

Power and control systems

As much as possible can be installed close to the user and operate the air switch to control the power supply of the fume purifier.More convenient and controllable, and ensure that the intermediate position can be installed and not blocked.At the same time, it is necessary to ensure that the wiring errors of the power supply and control system are credible, and avoid as much as possible when the wires can be placed together during the installation process to prevent short circuits or open circuits.Resin pills or clean water markets can be installed, and the operation method must be indicated.

Summarize